Agilent 33220A#

Control the Agilent 33220A function generator from Python with the Agilent33220A driver.

Driver: pymeasure
Type: Function and waveform generators
Manufacturer: Agilent

Represents the Agilent 33220A Arbitrary Waveform Generator.

Publishing through instro#

instro publishes the commands you send to a Agilent33220A and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.agilent import Agilent33220A
from instro.pymeasure import PymeasureInstrument

# Default channel for the Agilent 33220A
with PymeasureInstrument(
    name="wfg",
    instrument=Agilent33220A("GPIB::10"),
    dataset_rid="<dataset rid>",
) as wfg:

    wfg.device.shape = "SINUSOID"          # Sets a sine waveform
    wfg.device.frequency = 4.7e3           # Sets the frequency to 4.7 kHz
    wfg.device.amplitude = 1               # Set amplitude of 1 V
    wfg.device.offset = 0                  # Set the amplitude to 0 V

    wfg.device.burst_state = True          # Enable burst mode
    wfg.device.burst_ncycles = 10          # A burst will consist of 10 cycles
    wfg.device.burst_mode = "TRIGGERED"    # A burst will be applied on a trigger
    wfg.device.trigger_source = "BUS"      # A burst will be triggered on TRG*

    wfg.device.output = True               # Enable output of waveform generator
    wfg.device.trigger()                   # Trigger a burst
    wfg.device.wait_for_trigger()          # Wait until the triggering is finished
    wfg.device.beep()                      # "beep"

    print(wfg.device.check_errors())       # Get the error queue

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from pymeasure.instruments.agilent import Agilent33220A
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

# Default channel for the Agilent 33220A
wfg = Agilent33220A("GPIB::10")
recorder = attach(wfg, "wfg", [NominalCorePublisher(dataset_rid="<dataset rid>")])

wfg.shape = "SINUSOID"          # Sets a sine waveform
wfg.frequency = 4.7e3           # Sets the frequency to 4.7 kHz
wfg.amplitude = 1               # Set amplitude of 1 V
wfg.offset = 0                  # Set the amplitude to 0 V

wfg.burst_state = True          # Enable burst mode
wfg.burst_ncycles = 10          # A burst will consist of 10 cycles
wfg.burst_mode = "TRIGGERED"    # A burst will be applied on a trigger
wfg.trigger_source = "BUS"      # A burst will be triggered on TRG*

wfg.output = True               # Enable output of waveform generator
wfg.trigger()                   # Trigger a burst
wfg.wait_for_trigger()          # Wait until the triggering is finished
wfg.beep()                      # "beep"

print(wfg.check_errors())       # Get the error queue

recorder.close()  # flush and close the publishers

The examples are adapted from the pymeasure documentation for Agilent33220A, which lists every property and method.