Agilent 4156#
Control the Agilent 4156 multimeter from Python with the Agilent4156 driver.
Driver: pymeasure
Type: Multimeters and source meters
Manufacturer: Agilent
Represents the Agilent 4155/4156 Semiconductor Parameter Analyzer and provides a high-level interface for taking current-voltage (I-V) measurements.
Publishing through instro#
instro publishes the commands you send to a Agilent4156 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".
With a PymeasureInstrument#
PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.
from pymeasure.instruments.agilent import Agilent4156
from instro.pymeasure import PymeasureInstrument
# explicitly define r/w terminations; set sufficiently large timeout or None.
with PymeasureInstrument(
name="smu",
instrument=Agilent4156('GPIB0::25', read_termination='\n', write_termination='\n', timeout=None),
dataset_rid="<dataset rid>",
) as smu:
# reset the instrument
smu.device.reset()
# define configuration file for instrument and load config
smu.device.configure("configuration_file.json")
# save data variables, some or all of which are defined in the json config file.
smu.device.save(['VC', 'IC', 'VB', 'IB'])
# take measurements
status = smu.device.measure()
# measured data is a pandas dataframe and can be exported to csv.
data = smu.device.get_data(path='./t1.csv')
With existing pymeasure code (attach())#
attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.
from pymeasure.instruments.agilent import Agilent4156
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
# explicitly define r/w terminations; set sufficiently large timeout or None.
smu = Agilent4156("GPIB0::25", read_termination = '\n', write_termination = '\n',
timeout=None)
recorder = attach(smu, "smu", [NominalCorePublisher(dataset_rid="<dataset rid>")])
# reset the instrument
smu.reset()
# define configuration file for instrument and load config
smu.configure("configuration_file.json")
# save data variables, some or all of which are defined in the json config file.
smu.save(['VC', 'IC', 'VB', 'IB'])
# take measurements
status = smu.measure()
# measured data is a pandas dataframe and can be exported to csv.
data = smu.get_data(path='./t1.csv')
recorder.close() # flush and close the publishers
The examples are adapted from the pymeasure documentation for Agilent4156, which lists every property and method.