Agilent N8975A#

Control the Agilent N8975A instrument from Python with the AgilentN8975A driver.

Driver: pymeasure
Type: Other instruments
Manufacturer: Agilent

A class representing the Agilent N8975A Noise Figure Analyzer.

Publishing through instro#

instro publishes the commands you send to a AgilentN8975A and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.agilent import AgilentN8975A
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="nfa",
    instrument=AgilentN8975A("GPIB0::16::INSTR"),
    dataset_rid="<dataset rid>",
) as nfa:
    nfa.device.adapter.connection.timeout = 30000  # set a new timeout to 30 sec
    nfa.device.abort()  # abort all running measurements
    nfa.device.single()  # perform a single sweep measurement
    nfa.device.complete
    noise_figure = nfa.device.noise_figure_db  # get the noise figure data
    gain = nfa.device.gain_db  # get the gain data

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from pymeasure.instruments.agilent import AgilentN8975A
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

nfa = AgilentN8975A("GPIB0::16::INSTR")
recorder = attach(nfa, "nfa", [NominalCorePublisher(dataset_rid="<dataset rid>")])
nfa.adapter.connection.timeout = 30000  # set a new timeout to 30 sec
nfa.abort()  # abort all running measurements
nfa.single()  # perform a single sweep measurement
nfa.complete
noise_figure = nfa.noise_figure_db  # get the noise figure data
gain = nfa.gain_db  # get the gain data

recorder.close()  # flush and close the publishers

The examples are adapted from the pymeasure documentation for AgilentN8975A, which lists every property and method.