Heidenhain ND287#
Control the Heidenhain ND287 motion controller from Python with the ND287 driver.
Driver: pymeasure
Type: Motion and positioning
Manufacturer: Heidenhain
Represents the Heidenhain ND287 position display unit used to readout and display absolute position measured by Heidenhain encoders.
Publishing through instro#
instro publishes the commands you send to a ND287 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".
With a PymeasureInstrument#
PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.
from pymeasure.instruments.heidenhain import ND287
from instro.pymeasure import PymeasureInstrument
with PymeasureInstrument(
name="nd287",
instrument=ND287("<visa_resource>"),
dataset_rid="<dataset rid>",
) as instrument:
print(instrument.device.position)
With existing pymeasure code (attach())#
attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
from pymeasure.instruments.heidenhain import ND287
nd287 = ND287("<visa_resource>")
recorder = attach(nd287, "nd287", [NominalCorePublisher(dataset_rid="<dataset rid>")])
print(nd287.position)
recorder.close() # flush and close the publishers
For the full list of properties and methods, see the pymeasure documentation for ND287.