HP 34401A#
Control the HP 34401A multimeter from Python with the HP34401A driver.
Driver: pymeasure
Type: Multimeters and source meters
Manufacturer: HP
Represents the HP / Agilent / Keysight 34401A Multimeter and provides a high-level interface for interacting with the instrument.
Publishing through instro#
instro publishes the commands you send to a HP34401A and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".
With a PymeasureInstrument#
PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.
from pymeasure.instruments.hp import HP34401A
from instro.pymeasure import PymeasureInstrument
with PymeasureInstrument(
name="dmm",
instrument=HP34401A("GPIB::1"),
dataset_rid="<dataset rid>",
) as dmm:
dmm.device.function_ = "DCV"
print(dmm.device.reading) # -> Single float reading
dmm.device.nplc = 0.02
dmm.device.autozero_enabled = False
dmm.device.trigger_count = 100
dmm.device.trigger_delay = "MIN"
print(dmm.device.reading) # -> Array of 100 very fast readings
With existing pymeasure code (attach())#
attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.
from pymeasure.instruments.hp import HP34401A
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
dmm = HP34401A("GPIB::1")
recorder = attach(dmm, "dmm", [NominalCorePublisher(dataset_rid="<dataset rid>")])
dmm.function_ = "DCV"
print(dmm.reading) # -> Single float reading
dmm.nplc = 0.02
dmm.autozero_enabled = False
dmm.trigger_count = 100
dmm.trigger_delay = "MIN"
print(dmm.reading) # -> Array of 100 very fast readings
recorder.close() # flush and close the publishers
The examples are adapted from the pymeasure documentation for HP34401A, which lists every property and method.