Keithley 2400#

Control the Keithley 2400 multimeter from Python with the Keithley2400 driver.

Driver: pymeasure
Type: Multimeters and source meters
Manufacturer: Keithley

Represent the Keithley 2400 SourceMeter and provide a high-level interface for interacting with the instrument.

Publishing through instro#

instro publishes the commands you send to a Keithley2400 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.keithley import Keithley2400
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="smu",
    instrument=Keithley2400("GPIB::1"),
    dataset_rid="<dataset rid>",
) as smu:
    smu.device.reset()                        # Resets the instrument

    smu.device.source_mode = "current"        # Sets up to source current
    smu.device.source_enabled = True          # Enables the source output

    smu.device.ramp_to_current(5e-3)          # Ramps the current to 5 mA
    print(smu.device.voltage)                 # Prints the voltage in Volts

    smu.device.reset()                        # Resets the instrument

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from pymeasure.instruments.keithley import Keithley2400
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

smu = Keithley2400("GPIB::1")
recorder = attach(smu, "smu", [NominalCorePublisher(dataset_rid="<dataset rid>")])
smu.reset()                        # Resets the instrument

smu.source_mode = "current"        # Sets up to source current
smu.source_enabled = True          # Enables the source output

smu.ramp_to_current(5e-3)          # Ramps the current to 5 mA
print(smu.voltage)                 # Prints the voltage in Volts

smu.reset()                        # Resets the instrument

recorder.close()  # flush and close the publishers

The examples are adapted from the pymeasure documentation for Keithley2400, which lists every property and method.