# Keithley 2450

Control the Keithley 2450 multimeter from Python with the `Keithley2450` driver.

**Driver:** [pymeasure](https://pymeasure.readthedocs.io)  
**Type:** [Multimeters and source meters](https://dev.nominal.io/instro/instruments/type/dmm.md)  
**Manufacturer:** [Keithley](https://dev.nominal.io/instro/instruments/manufacturer/keithley.md)

Represents the Keithley 2450 SourceMeter and provides a high-level interface for interacting with the instrument.

## Publishing through instro

instro publishes the commands you send to a Keithley2450 and the values you read from it, through any [publisher](https://dev.nominal.io/instro/library/publishers.md). It takes two forms, both described in the [pymeasure guide](https://dev.nominal.io/instro/library/pymeasure.md). Install with `uv add "instro[pymeasure]"`.

### With a PymeasureInstrument

[`PymeasureInstrument`](https://dev.nominal.io/instro/library/pymeasure.md#write-new-instro-code) wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the `with` block, and `.device` is the pymeasure instrument.

```python
from pymeasure.instruments.keithley import Keithley2450
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="keithley",
    instrument=Keithley2450("GPIB::1"),
    dataset_rid="<dataset rid>",
) as keithley:

    keithley.device.apply_current()                # Sets up to source current
    keithley.device.source_current_range = 10e-3   # Sets the source current range to 10 mA
    keithley.device.compliance_voltage = 10        # Sets the compliance voltage to 10 V
    keithley.device.source_current = 0             # Sets the source current to 0 mA
    keithley.device.enable_source()                # Enables the source output

    keithley.device.measure_voltage()              # Sets up to measure voltage

    keithley.device.ramp_to_current(5e-3)          # Ramps the current to 5 mA
    print(keithley.device.voltage)                 # Prints the voltage in Volts

    keithley.device.shutdown()                     # Ramps the current to 0 mA and disables output
```

### With existing pymeasure code (`attach()`)

[`attach()`](https://dev.nominal.io/instro/library/pymeasure.md#publish-from-existing-code) adds publishing to pymeasure code you already have. The imports, the `attach()` call after the instrument is created, and `recorder.close()` are all that instro adds.

```python
from pymeasure.instruments.keithley import Keithley2450
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

keithley = Keithley2450("GPIB::1")
recorder = attach(keithley, "keithley", [NominalCorePublisher(dataset_rid="<dataset rid>")])

keithley.apply_current()                # Sets up to source current
keithley.source_current_range = 10e-3   # Sets the source current range to 10 mA
keithley.compliance_voltage = 10        # Sets the compliance voltage to 10 V
keithley.source_current = 0             # Sets the source current to 0 mA
keithley.enable_source()                # Enables the source output

keithley.measure_voltage()              # Sets up to measure voltage

keithley.ramp_to_current(5e-3)          # Ramps the current to 5 mA
print(keithley.voltage)                 # Prints the voltage in Volts

keithley.shutdown()                     # Ramps the current to 0 mA and disables output

recorder.close()  # flush and close the publishers
```

The examples are adapted from the [pymeasure documentation for `Keithley2450`](https://pymeasure.readthedocs.io/en/latest/api/instruments/keithley/keithley2450.html#pymeasure.instruments.keithley.keithley2450.Keithley2450), which lists every property and method.
