Keithley 2450#
Control the Keithley 2450 multimeter from Python with the Keithley2450 driver.
Driver: pymeasure
Type: Multimeters and source meters
Manufacturer: Keithley
Represents the Keithley 2450 SourceMeter and provides a high-level interface for interacting with the instrument.
Publishing through instro#
instro publishes the commands you send to a Keithley2450 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".
With a PymeasureInstrument#
PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.
from pymeasure.instruments.keithley import Keithley2450
from instro.pymeasure import PymeasureInstrument
with PymeasureInstrument(
name="keithley",
instrument=Keithley2450("GPIB::1"),
dataset_rid="<dataset rid>",
) as keithley:
keithley.device.apply_current() # Sets up to source current
keithley.device.source_current_range = 10e-3 # Sets the source current range to 10 mA
keithley.device.compliance_voltage = 10 # Sets the compliance voltage to 10 V
keithley.device.source_current = 0 # Sets the source current to 0 mA
keithley.device.enable_source() # Enables the source output
keithley.device.measure_voltage() # Sets up to measure voltage
keithley.device.ramp_to_current(5e-3) # Ramps the current to 5 mA
print(keithley.device.voltage) # Prints the voltage in Volts
keithley.device.shutdown() # Ramps the current to 0 mA and disables output
With existing pymeasure code (attach())#
attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.
from pymeasure.instruments.keithley import Keithley2450
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
keithley = Keithley2450("GPIB::1")
recorder = attach(keithley, "keithley", [NominalCorePublisher(dataset_rid="<dataset rid>")])
keithley.apply_current() # Sets up to source current
keithley.source_current_range = 10e-3 # Sets the source current range to 10 mA
keithley.compliance_voltage = 10 # Sets the compliance voltage to 10 V
keithley.source_current = 0 # Sets the source current to 0 mA
keithley.enable_source() # Enables the source output
keithley.measure_voltage() # Sets up to measure voltage
keithley.ramp_to_current(5e-3) # Ramps the current to 5 mA
print(keithley.voltage) # Prints the voltage in Volts
keithley.shutdown() # Ramps the current to 0 mA and disables output
recorder.close() # flush and close the publishers
The examples are adapted from the pymeasure documentation for Keithley2450, which lists every property and method.