Keithley 6221#
Control the Keithley 6221 power supply from Python with the Keithley6221 driver.
Driver: pymeasure
Type: Power supplies
Manufacturer: Keithley
Represents the Keithley 6221 AC and DC current source and provides a high-level interface for interacting with the instrument.
Publishing through instro#
instro publishes the commands you send to a Keithley6221 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".
With a PymeasureInstrument#
PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.
from pymeasure.instruments.keithley import Keithley6221
from instro.pymeasure import PymeasureInstrument
with PymeasureInstrument(
name="keithley",
instrument=Keithley6221("GPIB::1"),
dataset_rid="<dataset rid>",
) as keithley:
keithley.device.clear()
# Use the keithley as an AC source
keithley.device.waveform_function = "square" # Set a square waveform
keithley.device.waveform_amplitude = 0.05 # Set the amplitude in Amps
keithley.device.waveform_offset = 0 # Set zero offset
keithley.device.source_compliance = 10 # Set compliance (limit) in V
keithley.device.waveform_dutycycle = 50 # Set duty cycle of wave in %
keithley.device.waveform_frequency = 347 # Set the frequency in Hz
keithley.device.waveform_ranging = "best" # Set optimal output ranging
keithley.device.waveform_duration_cycles = 100 # Set duration of the waveform
# Link end of waveform to Service Request status bit
keithley.device.operation_event_enabled = 128 # OSB listens to end of wave
keithley.device.srq_event_enabled = 128 # SRQ listens to OSB
keithley.device.waveform_arm() # Arm (load) the waveform
keithley.device.waveform_start() # Start the waveform
keithley.device.adapter.wait_for_srq() # Wait for the pulse to finish
keithley.device.waveform_abort() # Disarm (unload) the waveform
keithley.device.shutdown() # Disables output
With existing pymeasure code (attach())#
attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.
from pymeasure.instruments.keithley import Keithley6221
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
keithley = Keithley6221("GPIB::1")
recorder = attach(keithley, "keithley", [NominalCorePublisher(dataset_rid="<dataset rid>")])
keithley.clear()
# Use the keithley as an AC source
keithley.waveform_function = "square" # Set a square waveform
keithley.waveform_amplitude = 0.05 # Set the amplitude in Amps
keithley.waveform_offset = 0 # Set zero offset
keithley.source_compliance = 10 # Set compliance (limit) in V
keithley.waveform_dutycycle = 50 # Set duty cycle of wave in %
keithley.waveform_frequency = 347 # Set the frequency in Hz
keithley.waveform_ranging = "best" # Set optimal output ranging
keithley.waveform_duration_cycles = 100 # Set duration of the waveform
# Link end of waveform to Service Request status bit
keithley.operation_event_enabled = 128 # OSB listens to end of wave
keithley.srq_event_enabled = 128 # SRQ listens to OSB
keithley.waveform_arm() # Arm (load) the waveform
keithley.waveform_start() # Start the waveform
keithley.adapter.wait_for_srq() # Wait for the pulse to finish
keithley.waveform_abort() # Disarm (unload) the waveform
keithley.shutdown() # Disables output
recorder.close() # flush and close the publishers
The examples are adapted from the pymeasure documentation for Keithley6221, which lists every property and method.