Keithley 6517B#

Control the Keithley 6517B multimeter from Python with the Keithley6517B driver.

Driver: pymeasure
Type: Multimeters and source meters
Manufacturer: Keithley

Represents the Keithley 6517B ElectroMeter and provides a high-level interface for interacting with the instrument.

Publishing through instro#

instro publishes the commands you send to a Keithley6517B and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.keithley import Keithley6517B
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="keithley",
    instrument=Keithley6517B("GPIB::1"),
    dataset_rid="<dataset rid>",
) as keithley:

    keithley.device.apply_voltage()              # Sets up to source current
    keithley.device.source_voltage_range = 200   # Sets the source voltage
                                          # range to 200 V
    keithley.device.source_voltage = 20          # Sets the source voltage to 20 V
    keithley.device.enable_source()              # Enables the source output

    keithley.device.measure_resistance()         # Sets up to measure resistance

    keithley.device.ramp_to_voltage(50)          # Ramps the voltage to 50 V
    print(keithley.device.resistance)            # Prints the resistance in Ohms

    keithley.device.shutdown()                   # Ramps the voltage to 0 V
                                          # and disables output

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from pymeasure.instruments.keithley import Keithley6517B
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

keithley = Keithley6517B("GPIB::1")
recorder = attach(keithley, "keithley", [NominalCorePublisher(dataset_rid="<dataset rid>")])

keithley.apply_voltage()              # Sets up to source current
keithley.source_voltage_range = 200   # Sets the source voltage
                                      # range to 200 V
keithley.source_voltage = 20          # Sets the source voltage to 20 V
keithley.enable_source()              # Enables the source output

keithley.measure_resistance()         # Sets up to measure resistance

keithley.ramp_to_voltage(50)          # Ramps the voltage to 50 V
print(keithley.resistance)            # Prints the resistance in Ohms

keithley.shutdown()                   # Ramps the voltage to 0 V
                                      # and disables output

recorder.close()  # flush and close the publishers

The examples are adapted from the pymeasure documentation for Keithley6517B, which lists every property and method.