Keithley DAQ6510#

Control the Keithley DAQ6510 multimeter from Python with the KeithleyDAQ6510 driver.

Driver: pymeasure
Type: Multimeters and source meters
Manufacturer: Keithley

Represents the Keithley DAQ6510 Data Acquisition Logging Multimeter System and provides a high-level interface for interacting with the instrument.

Publishing through instro#

instro publishes the commands you send to a KeithleyDAQ6510 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.keithley import KeithleyDAQ6510
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="keithley",
    instrument=KeithleyDAQ6510("GPIB::1"),
    dataset_rid="<dataset rid>",
) as keithley:
    keithley.device = KeithleyDAQ6510("TCPIP::192.168.1.1::INSTR")

    print(keithley.device.current)                 # Prints the current in Amps
    keithley.device.current_range = 10E-6          # Select the 10 uA range

    print(keithley.device.voltage)                 # Prints the voltage in Volts
    keithley.device.voltage_range = 100e-3         # Select the 100 mV range

    print(keithley.device.resistance)              # Prints the resistance in Ohms
    keithley.device.offset_compensated = "ON"      # Turns offset-compensated ohms on

    keithley.device.open_channels([134, 135])      # Open channels 134 and 135 on the MUX card
    keithley.device.close_channel(133)             # Close channel 133 on the MUX card

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from pymeasure.instruments.keithley import KeithleyDAQ6510
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

keithley = KeithleyDAQ6510("GPIB::1")
recorder = attach(keithley, "keithley", [NominalCorePublisher(dataset_rid="<dataset rid>")])
keithley = KeithleyDAQ6510("TCPIP::192.168.1.1::INSTR")

print(keithley.current)                 # Prints the current in Amps
keithley.current_range = 10E-6          # Select the 10 uA range

print(keithley.voltage)                 # Prints the voltage in Volts
keithley.voltage_range = 100e-3         # Select the 100 mV range

print(keithley.resistance)              # Prints the resistance in Ohms
keithley.offset_compensated = "ON"      # Turns offset-compensated ohms on

keithley.open_channels([134, 135])      # Open channels 134 and 135 on the MUX card
keithley.close_channel(133)             # Close channel 133 on the MUX card

recorder.close()  # flush and close the publishers

The examples are adapted from the pymeasure documentation for KeithleyDAQ6510, which lists every property and method.