Kuhne Electronic Kusg245_250A#
Control the Kuhne Electronic Kusg245_250A RF instrument from Python with the Kusg245_250A driver.
Driver: pymeasure
Type: RF sources and meters
Manufacturer: Kuhne Electronic
Represents KU SG 2.45 250 A the 2.45 GHz ISM-Band Microwave Generator and provides a high-level interface for interacting with the instrument.
Publishing through instro#
instro publishes the commands you send to a Kusg245_250A and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".
With a PymeasureInstrument#
PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.
from pymeasure.instruments.kuhneelectronic import Kusg245_250A
from instro.pymeasure import PymeasureInstrument
with PymeasureInstrument(
name="generator",
instrument=Kusg245_250A("ASRL3::INSTR", power_limit=100),
dataset_rid="<dataset rid>",
) as generator:
# power set-point to 100 W
generator.device.external_enabled = False # biasing and RF output controlled by serial comm
generator.device.power = 20 # Sets the output power to 20 Watts
generator.device.bias_enabled = True # Enables amplifier biasing
generator.device.rf_enabled = True # Enables the RF output
p_fwd = generator.device.power_forward # Reads forward power in Watts
p_rev = generator.device.power_reverse # Reads reflected power in Watts
With existing pymeasure code (attach())#
attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.
from pymeasure.instruments.kuhneelectronic import Kusg245_250A
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
generator = Kusg245_250A("ASRL3::INSTR", power_limit=100) # limits the output
recorder = attach(generator, "generator", [NominalCorePublisher(dataset_rid="<dataset rid>")])
# power set-point to 100 W
generator.external_enabled = False # biasing and RF output controlled by serial comm
generator.power = 20 # Sets the output power to 20 Watts
generator.bias_enabled = True # Enables amplifier biasing
generator.rf_enabled = True # Enables the RF output
p_fwd = generator.power_forward # Reads forward power in Watts
p_rev = generator.power_reverse # Reads reflected power in Watts
recorder.close() # flush and close the publishers
The examples are adapted from the pymeasure documentation for Kusg245_250A, which lists every property and method.