# Lake Shore Cryotronics 3xx

Control the Lake Shore Cryotronics 3xx temperature controller from Python with the `LakeShore3xx` driver.

**Driver:** [pymeasure](https://pymeasure.readthedocs.io)  
**Type:** [Temperature controllers and chambers](https://dev.nominal.io/instro/instruments/type/temperature.md)  
**Manufacturer:** [Lake Shore Cryotronics](https://dev.nominal.io/instro/instruments/manufacturer/lake-shore-cryotronics.md)

Represents a Lake Shore Temperature Controller of the 3xx-Series and provides a high-level interface for interacting with the instrument.

## Publishing through instro

instro publishes the commands you send to a LakeShore3xx and the values you read from it, through any [publisher](https://dev.nominal.io/instro/library/publishers.md). It takes two forms, both described in the [pymeasure guide](https://dev.nominal.io/instro/library/pymeasure.md). Install with `uv add "instro[pymeasure]"`.

### With a PymeasureInstrument

[`PymeasureInstrument`](https://dev.nominal.io/instro/library/pymeasure.md#write-new-instro-code) wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the `with` block, and `.device` is the pymeasure instrument.

```python
from pymeasure.instruments.lakeshore import LakeShore3xx
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="controller",
    instrument=LakeShore3xx("GPIB::1"),
    dataset_rid="<dataset rid>",
) as controller:

    print(controller.device.output_1.setpoint)         # Print the current setpoint for loop 1
    controller.device.output_1.setpoint = 50           # Change the loop 1 setpoint to 50 K
    controller.device.output_1.heater_range = 'low'    # Change the heater range to low.
    controller.device.input_A.wait_for_temperature()   # Wait for the temperature to stabilize.
    print(controller.device.input_A.kelvin)            # Print the temperature at sensor A.
```

### With existing pymeasure code (`attach()`)

[`attach()`](https://dev.nominal.io/instro/library/pymeasure.md#publish-from-existing-code) adds publishing to pymeasure code you already have. The imports, the `attach()` call after the instrument is created, and `recorder.close()` are all that instro adds.

```python
from pymeasure.instruments.lakeshore import LakeShore3xx
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

controller = LakeShore3xx("GPIB::1")
recorder = attach(controller, "controller", [NominalCorePublisher(dataset_rid="<dataset rid>")])

print(controller.output_1.setpoint)         # Print the current setpoint for loop 1
controller.output_1.setpoint = 50           # Change the loop 1 setpoint to 50 K
controller.output_1.heater_range = 'low'    # Change the heater range to low.
controller.input_A.wait_for_temperature()   # Wait for the temperature to stabilize.
print(controller.input_A.kelvin)            # Print the temperature at sensor A.

recorder.close()  # flush and close the publishers
```

The examples are adapted from the [pymeasure documentation for `LakeShore3xx`](https://pymeasure.readthedocs.io/en/latest/api/instruments/lakeshore/lakeshore3xx.html#pymeasure.instruments.lakeshore.lakeshore3xx.LakeShore3xx), which lists every property and method.
