Lake Shore Cryotronics 3xx#
Control the Lake Shore Cryotronics 3xx temperature controller from Python with the LakeShore3xx driver.
Driver: pymeasure
Type: Temperature controllers and chambers
Manufacturer: Lake Shore Cryotronics
Represents a Lake Shore Temperature Controller of the 3xx-Series and provides a high-level interface for interacting with the instrument.
Publishing through instro#
instro publishes the commands you send to a LakeShore3xx and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".
With a PymeasureInstrument#
PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.
from pymeasure.instruments.lakeshore import LakeShore3xx
from instro.pymeasure import PymeasureInstrument
with PymeasureInstrument(
name="controller",
instrument=LakeShore3xx("GPIB::1"),
dataset_rid="<dataset rid>",
) as controller:
print(controller.device.output_1.setpoint) # Print the current setpoint for loop 1
controller.device.output_1.setpoint = 50 # Change the loop 1 setpoint to 50 K
controller.device.output_1.heater_range = 'low' # Change the heater range to low.
controller.device.input_A.wait_for_temperature() # Wait for the temperature to stabilize.
print(controller.device.input_A.kelvin) # Print the temperature at sensor A.
With existing pymeasure code (attach())#
attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.
from pymeasure.instruments.lakeshore import LakeShore3xx
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
controller = LakeShore3xx("GPIB::1")
recorder = attach(controller, "controller", [NominalCorePublisher(dataset_rid="<dataset rid>")])
print(controller.output_1.setpoint) # Print the current setpoint for loop 1
controller.output_1.setpoint = 50 # Change the loop 1 setpoint to 50 K
controller.output_1.heater_range = 'low' # Change the heater range to low.
controller.input_A.wait_for_temperature() # Wait for the temperature to stabilize.
print(controller.input_A.kelvin) # Print the temperature at sensor A.
recorder.close() # flush and close the publishers
The examples are adapted from the pymeasure documentation for LakeShore3xx, which lists every property and method.