Oxford Instruments ITC503#

Control the Oxford Instruments ITC503 temperature controller from Python with the ITC503 driver.

Driver: pymeasure
Type: Temperature controllers and chambers
Manufacturer: Oxford Instruments

Represents the Oxford Intelligent Temperature Controller 503.

Publishing through instro#

instro publishes the commands you send to a ITC503 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.oxfordinstruments import ITC503
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="itc",
    instrument=ITC503("GPIB::24"),
    dataset_rid="<dataset rid>",
) as itc:

    itc.device.control_mode = "RU"         # Set the control mode to remote
    itc.device.heater_gas_mode = "AUTO"    # Turn on auto heater and flow
    itc.device.auto_pid = True             # Turn on auto-pid

    print(itc.device.temperature_setpoint) # Print the current set-point
    itc.device.temperature_setpoint = 300  # Change the set-point to 300 K
    itc.device.wait_for_temperature()      # Wait for the temperature to stabilize
    print(itc.device.temperature_1)        # Print the temperature at sensor 1

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from pymeasure.instruments.oxfordinstruments import ITC503
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

itc = ITC503("GPIB::24")        # Default channel for the ITC503
recorder = attach(itc, "itc", [NominalCorePublisher(dataset_rid="<dataset rid>")])

itc.control_mode = "RU"         # Set the control mode to remote
itc.heater_gas_mode = "AUTO"    # Turn on auto heater and flow
itc.auto_pid = True             # Turn on auto-pid

print(itc.temperature_setpoint) # Print the current set-point
itc.temperature_setpoint = 300  # Change the set-point to 300 K
itc.wait_for_temperature()      # Wait for the temperature to stabilize
print(itc.temperature_1)        # Print the temperature at sensor 1

recorder.close()  # flush and close the publishers

The examples are adapted from the pymeasure documentation for ITC503, which lists every property and method.