# Razorbill RP100

Control the Razorbill RP100 instrument from Python with the `razorbillRP100` driver.

**Driver:** [pymeasure](https://pymeasure.readthedocs.io)  
**Type:** [Other instruments](https://dev.nominal.io/instro/instruments/type/other.md)  
**Manufacturer:** [Razorbill](https://dev.nominal.io/instro/instruments/manufacturer/razorbill.md)

Represents Razorbill RP100 strain cell controller.

## Publishing through instro

instro publishes the commands you send to a razorbillRP100 and the values you read from it, through any [publisher](https://dev.nominal.io/instro/library/publishers.md). It takes two forms, both described in the [pymeasure guide](https://dev.nominal.io/instro/library/pymeasure.md). Install with `uv add "instro[pymeasure]"`.

### With a PymeasureInstrument

[`PymeasureInstrument`](https://dev.nominal.io/instro/library/pymeasure.md#write-new-instro-code) wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the `with` block, and `.device` is the pymeasure instrument.

```python
from pymeasure.instruments.razorbill import razorbillRP100
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="scontrol",
    instrument=razorbillRP100("ASRL/dev/ttyACM0::INSTR"),
    dataset_rid="<dataset rid>",
) as scontrol:

    scontrol.device.output_1 = True      # turns output on
    scontrol.device.slew_rate_1 = 1      # sets slew rate to 1V/s
    scontrol.device.voltage_1 = 10       # sets voltage on output 1 to 10V
```

### With existing pymeasure code (`attach()`)

[`attach()`](https://dev.nominal.io/instro/library/pymeasure.md#publish-from-existing-code) adds publishing to pymeasure code you already have. The imports, the `attach()` call after the instrument is created, and `recorder.close()` are all that instro adds.

```python
from pymeasure.instruments.razorbill import razorbillRP100
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

scontrol = razorbillRP100("ASRL/dev/ttyACM0::INSTR")
recorder = attach(scontrol, "scontrol", [NominalCorePublisher(dataset_rid="<dataset rid>")])

scontrol.output_1 = True      # turns output on
scontrol.slew_rate_1 = 1      # sets slew rate to 1V/s
scontrol.voltage_1 = 10       # sets voltage on output 1 to 10V

recorder.close()  # flush and close the publishers
```

The examples are adapted from the [pymeasure documentation for `razorbillRP100`](https://pymeasure.readthedocs.io/en/latest/api/instruments/razorbill/razorbillRP100.html#pymeasure.instruments.razorbill.razorbillRP100.razorbillRP100), which lists every property and method.
