Razorbill RP100#
Control the Razorbill RP100 instrument from Python with the razorbillRP100 driver.
Driver: pymeasure
Type: Other instruments
Manufacturer: Razorbill
Represents Razorbill RP100 strain cell controller.
Publishing through instro#
instro publishes the commands you send to a razorbillRP100 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".
With a PymeasureInstrument#
PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.
from pymeasure.instruments.razorbill import razorbillRP100
from instro.pymeasure import PymeasureInstrument
with PymeasureInstrument(
name="scontrol",
instrument=razorbillRP100("ASRL/dev/ttyACM0::INSTR"),
dataset_rid="<dataset rid>",
) as scontrol:
scontrol.device.output_1 = True # turns output on
scontrol.device.slew_rate_1 = 1 # sets slew rate to 1V/s
scontrol.device.voltage_1 = 10 # sets voltage on output 1 to 10V
With existing pymeasure code (attach())#
attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.
from pymeasure.instruments.razorbill import razorbillRP100
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
scontrol = razorbillRP100("ASRL/dev/ttyACM0::INSTR")
recorder = attach(scontrol, "scontrol", [NominalCorePublisher(dataset_rid="<dataset rid>")])
scontrol.output_1 = True # turns output on
scontrol.slew_rate_1 = 1 # sets slew rate to 1V/s
scontrol.voltage_1 = 10 # sets voltage on output 1 to 10V
recorder.close() # flush and close the publishers
The examples are adapted from the pymeasure documentation for razorbillRP100, which lists every property and method.