TDK Gen40_38#

Control the TDK Gen40_38 power supply from Python with the TDK_Gen40_38 driver.

Driver: pymeasure
Type: Power supplies
Manufacturer: TDK

Represents the TDK Lambda Genesys 40-38 DC power supply.

Publishing through instro#

instro publishes the commands you send to a TDK_Gen40_38 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.tdk import TDK_Gen40_38
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="psu",
    instrument=TDK_Gen40_38("COM3", 6),
    dataset_rid="<dataset rid>",
) as psu:
    psu.device.remote = "REM"                  # PSU in remote mode
    psu.device.output_enabled = True           # Turn on output
    psu.device.ramp_to_current(2.0)            # Ramp to 2.0 A of current
    print(psu.device.current)                  # Measure actual PSU current
    print(psu.device.voltage)                  # Measure actual PSU voltage
    psu.device.shutdown()                      # Run shutdown command

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from pymeasure.instruments.tdk import TDK_Gen40_38
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

psu = TDK_Gen40_38("COM3", 6)       # COM port and daisy-chain address
recorder = attach(psu, "psu", [NominalCorePublisher(dataset_rid="<dataset rid>")])
psu.remote = "REM"                  # PSU in remote mode
psu.output_enabled = True           # Turn on output
psu.ramp_to_current(2.0)            # Ramp to 2.0 A of current
print(psu.current)                  # Measure actual PSU current
print(psu.voltage)                  # Measure actual PSU voltage
psu.shutdown()                      # Run shutdown command

recorder.close()  # flush and close the publishers

The examples are adapted from the pymeasure documentation for TDK_Gen40_38, which lists every property and method.