Thermotron 3800#

Control the Thermotron 3800 temperature controller from Python with the Thermotron3800 driver.

Driver: pymeasure
Type: Temperature controllers and chambers
Manufacturer: Thermotron

Represents the Thermotron 3800 Oven.

Publishing through instro#

instro publishes the commands you send to a Thermotron3800 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.thermotron import Thermotron3800

from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="thermotron3800",
    instrument=Thermotron3800("<visa_resource>"),
    dataset_rid="<dataset rid>",
) as instrument:
    print(instrument.device.mode)

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from instro.lib import NominalCorePublisher
from instro.pymeasure import attach
from pymeasure.instruments.thermotron import Thermotron3800

thermotron3800 = Thermotron3800("<visa_resource>")
recorder = attach(thermotron3800, "thermotron3800", [NominalCorePublisher(dataset_rid="<dataset rid>")])
print(thermotron3800.mode)
recorder.close()  # flush and close the publishers

For the full list of properties and methods, see the pymeasure documentation for Thermotron3800.