Yokogawa 7651#

Control the Yokogawa 7651 power supply from Python with the Yokogawa7651 driver.

Driver: pymeasure
Type: Power supplies
Manufacturer: Yokogawa

Represents the Yokogawa 7651 Programmable DC Source and provides a high-level for interacting with the instrument.

Publishing through instro#

instro publishes the commands you send to a Yokogawa7651 and the values you read from it, through any publisher. It takes two forms, both described in the pymeasure guide. Install with uv add "instro[pymeasure]".

With a PymeasureInstrument#

PymeasureInstrument wraps the driver in an instro instrument, with tags and background polling. The instrument is created inside the with block, and .device is the pymeasure instrument.

from pymeasure.instruments.yokogawa import Yokogawa7651
from instro.pymeasure import PymeasureInstrument

with PymeasureInstrument(
    name="yoko",
    instrument=Yokogawa7651("GPIB::1"),
    dataset_rid="<dataset rid>",
) as yoko:

    yoko.device.apply_current()                # Sets up to source current
    yoko.device.source_current_range = 10e-3   # Sets the current range to 10 mA
    yoko.device.compliance_voltage = 10        # Sets the compliance voltage to 10 V
    yoko.device.source_current = 0             # Sets the source current to 0 mA

    yoko.device.enable_source()                # Enables the current output
    yoko.device.ramp_to_current(5e-3)          # Ramps the current to 5 mA

    yoko.device.shutdown()                     # Ramps the current to 0 mA and disables output

With existing pymeasure code (attach())#

attach() adds publishing to pymeasure code you already have. The imports, the attach() call after the instrument is created, and recorder.close() are all that instro adds.

from pymeasure.instruments.yokogawa import Yokogawa7651
from instro.lib import NominalCorePublisher
from instro.pymeasure import attach

yoko = Yokogawa7651("GPIB::1")
recorder = attach(yoko, "yoko", [NominalCorePublisher(dataset_rid="<dataset rid>")])

yoko.apply_current()                # Sets up to source current
yoko.source_current_range = 10e-3   # Sets the current range to 10 mA
yoko.compliance_voltage = 10        # Sets the compliance voltage to 10 V
yoko.source_current = 0             # Sets the source current to 0 mA

yoko.enable_source()                # Enables the current output
yoko.ramp_to_current(5e-3)          # Ramps the current to 5 mA

yoko.shutdown()                     # Ramps the current to 0 mA and disables output

recorder.close()  # flush and close the publishers

The examples are adapted from the pymeasure documentation for Yokogawa7651, which lists every property and method.