# Fluke8808A

## class Fluke8808A(visa_resource: str | VisaConfig)[source]

Bases: [`DMMDriverBase`](https://dev.nominal.io/instro/ref/instruments/instro.dmm.DMMDriverBase.md#instro.dmm.DMMDriverBase "instro.dmm.dmm.DMMDriverBase")

Fluke 8808A on its RS-232 port, primary display only. Resolution is set via `set_digits`.

Configure the driver; the port is not opened until `open()`.

The front panel is locked (`RWLS`) while the driver holds the meter, so the function
it tracks can’t be changed underneath it.

Parameters:
:   **visa_resource** ([*str*](https://docs.python.org/3/builtins/stdtypes.html#str "(in Python v3.15)") *|* [*VisaConfig*](https://dev.nominal.io/instro/ref/library/instro.lib.transports.visa.VisaConfig.md#instro.lib.transports.visa.VisaConfig "instro.unstable.dmm.drivers.fluke_8808a.VisaConfig"))

    ASRL resource string, e.g. `"ASRL3::INSTR"` or
    `"ASRL/dev/ttyUSB0::INSTR"`, or a `VisaConfig` whose `serial_config` matches
    the meter’s front-panel RS-232 setup. The defaults (9600 baud, 8N1, no flow
    control) match the factory setup.

Example

```
>>> from instro.dmm import InstroDMM
>>> from instro.unstable.dmm.drivers import Fluke8808A
>>> dmm = InstroDMM(name="fluke", driver=Fluke8808A("ASRL/dev/ttyUSB0::INSTR"))
>>> dmm.open()
>>> dmm.read_dc_voltage()
```

Methods

| [`close`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.close "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.close") | Return the meter to local control and close the port. |
| --- | --- |
| [`measure_ac_current`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_ac_current "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_ac_current") | Trigger an AC-current measurement and return the value (amperes RMS, vendor-dependent). |
| [`measure_ac_voltage`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_ac_voltage "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_ac_voltage") | Trigger an AC-voltage measurement and return the value (volts RMS, vendor-dependent). |
| [`measure_dc_current`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_dc_current "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_dc_current") | Trigger a DC-current measurement and return the value (amperes). |
| [`measure_dc_voltage`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_dc_voltage "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_dc_voltage") | Trigger a DC-voltage measurement and return the value (volts). |
| [`measure_four_wire_resistance`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_four_wire_resistance "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_four_wire_resistance") | Trigger a 4-wire-resistance measurement and return the value (ohms). |
| [`measure_resistance`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_resistance "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.measure_resistance") | Trigger a 2-wire-resistance measurement and return the value (ohms). |
| [`open`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.open "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.open") | Open the port and reset the meter into remote mode with the front panel locked. |
| [`set_ac_current_nplc`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_ac_current_nplc "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_ac_current_nplc") | Set AC-current integration time to `nplc` power-line cycles. |
| [`set_ac_current_range`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_ac_current_range "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_ac_current_range") | Set manual AC-current range to `value` amperes; `None` selects auto-range. |
| [`set_ac_voltage_nplc`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_ac_voltage_nplc "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_ac_voltage_nplc") | Set AC-voltage integration time to `nplc` power-line cycles. |
| [`set_ac_voltage_range`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_ac_voltage_range "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_ac_voltage_range") | Set manual AC-voltage range to `value` volts; `None` selects auto-range. |
| [`set_aperture_seconds`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_aperture_seconds "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_aperture_seconds") | Set integration time directly in seconds. |
| [`set_dc_current_nplc`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_dc_current_nplc "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_dc_current_nplc") | Set DC-current integration time to `nplc` power-line cycles. |
| [`set_dc_current_range`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_dc_current_range "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_dc_current_range") | Set manual DC-current range to `value` amperes; `None` selects auto-range. |
| [`set_dc_voltage_nplc`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_dc_voltage_nplc "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_dc_voltage_nplc") | Set DC-voltage integration time to `nplc` power-line cycles. |
| [`set_dc_voltage_range`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_dc_voltage_range "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_dc_voltage_range") | Set manual DC-voltage range to `value` volts; `None` selects auto-range. |
| [`set_digits`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_digits "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_digits") | Set resolution: 5 selects the slow rate (2.5 rdg/s), 4 the fast rate (100 rdg/s). |
| [`set_four_wire_resistance_nplc`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_four_wire_resistance_nplc "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_four_wire_resistance_nplc") | Set 4-wire-resistance integration time to `nplc` power-line cycles. |
| [`set_four_wire_resistance_range`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_four_wire_resistance_range "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_four_wire_resistance_range") | Set manual 4-wire-resistance range to `value` ohms; `None` selects auto-range. |
| [`set_measurement_function`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_measurement_function "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_measurement_function") | Select `function` on the primary display. |
| [`set_two_wire_resistance_nplc`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_two_wire_resistance_nplc "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_two_wire_resistance_nplc") | Set 2-wire-resistance integration time to `nplc` power-line cycles. |
| [`set_two_wire_resistance_range`](https://dev.nominal.io/instro/ref/instruments/instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.md#instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_two_wire_resistance_range "instro.unstable.dmm.drivers.fluke_8808a.Fluke8808A.set_two_wire_resistance_range") | Set manual 2-wire-resistance range to `value` ohms; `None` selects auto-range. |

### open() → None[source]

Open the port and reset the meter into remote mode with the front panel locked.

### close() → None[source]

Return the meter to local control and close the port.

### set_measurement_function( function: MeasurementFunction, ) → None[source]

Select `function` on the primary display.

### set_digits(n: int) → None[source]

Set resolution: 5 selects the slow rate (2.5 rdg/s), 4 the fast rate (100 rdg/s).

The medium rate has the same 4.5-digit resolution as fast, so it is not reachable here.

### set_dc_voltage_range(value: float | None) → None[source]

Set manual DC-voltage range to `value` volts; `None` selects auto-range.

### set_ac_voltage_range(value: float | None) → None[source]

Set manual AC-voltage range to `value` volts; `None` selects auto-range.

### set_dc_current_range(value: float | None) → None[source]

Set manual DC-current range to `value` amperes; `None` selects auto-range.

### set_ac_current_range(value: float | None) → None[source]

Set manual AC-current range to `value` amperes; `None` selects auto-range.

### set_two_wire_resistance_range(value: float | None) → None[source]

Set manual 2-wire-resistance range to `value` ohms; `None` selects auto-range.

### set_four_wire_resistance_range(value: float | None) → None[source]

Set manual 4-wire-resistance range to `value` ohms; `None` selects auto-range.

### measure_dc_voltage() → float[source]

Trigger a DC-voltage measurement and return the value (volts).

### measure_ac_voltage() → float[source]

Trigger an AC-voltage measurement and return the value (volts RMS, vendor-dependent).

### measure_dc_current() → float[source]

Trigger a DC-current measurement and return the value (amperes).

### measure_ac_current() → float[source]

Trigger an AC-current measurement and return the value (amperes RMS, vendor-dependent).

### measure_resistance() → float[source]

Trigger a 2-wire-resistance measurement and return the value (ohms).

### measure_four_wire_resistance() → float[source]

Trigger a 4-wire-resistance measurement and return the value (ohms).

Default raises `NotImplementedError`; override on drivers whose
instrument has dedicated sense leads (e.g. Agilent 34401A).

### set_ac_current_nplc(nplc: float) → None

Set AC-current integration time to `nplc` power-line cycles.

### set_ac_voltage_nplc(nplc: float) → None

Set AC-voltage integration time to `nplc` power-line cycles.

### set_aperture_seconds(seconds: float) → None

Set integration time directly in seconds.

Default raises `NotImplementedError`. Mutually exclusive with
`set_aperture_nplc` on a given driver — vendors typically expose
one or the other.

### set_dc_current_nplc(nplc: float) → None

Set DC-current integration time to `nplc` power-line cycles.

### set_dc_voltage_nplc(nplc: float) → None

Set DC-voltage integration time to `nplc` power-line cycles.

### set_four_wire_resistance_nplc(nplc: float) → None

Set 4-wire-resistance integration time to `nplc` power-line cycles.

### set_two_wire_resistance_nplc(nplc: float) → None

Set 2-wire-resistance integration time to `nplc` power-line cycles.
